A simple phase-shift modulation using parabolic carrier for dual active bridge DC–DC converter

The power transfer of a dual active bridge (DAB) dc-dc converter is not linearly proportional to the phase shift between the two active bridges. When the DAB converter controller receives the power reference, the phase shift needs to be obtained by either solving a quadratic equation online or looking up from a table. The online calculation method is computationally inefficient. The lookup table method has only limited operating points. In addition, when using interpolation to find missing operating points from the table, the control accuracy will be reduced. This letter proposes a simple phase-shift modulation using a parabolic carrier. The proposed method converts the power command into phase shift by modulation. Therefore, the solving of the quadratic equation can be eliminated. The Verilog results are provided to verify the proposed parabolic carrier. A case study of DAB with sinusoidal ripple current charging concept is provided to demonstrate the advantage of the proposed method.