Climatic behaviour of solar photovoltaic integrated with phase change material

Sourav Khanna*, K. S. Reddy, Tapas K. Mallick

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

64 Downloads (Pure)

Abstract

In photovoltaic (PV) cells, a large portion of the solar-irradiance becomes heat which shoots the cell temperature up and decreases its electrical efficiency. The heat can be removed using phase-change-material (PCM) at the rear of the PV. In literature, the researchers have reported the performance of PV-PCM for their respective locations. However, selection criteria for climates suitable for PCM integration are not reported yet. Thus, it has been carried out in the current work. The model has been validated against the experimental measurements. It has been concluded that (i) the climates having less variations in the ambient temperature are more suitable for PCM integration. The electricity enhancement achieved by PV cooling is 9.7%. It reduces to 6.6% for the climate having large variations, (ii) Heat extraction by PCM-systems is more effective in warm climates in comparison to cold climates, (iii) PCM integration performs better in climates with low wind-speed, (iv) PCM is more effective for the climates where wind-flow is across the PV and (v) Climates having high solar-radiation is better for heat removal by PCM.

Original languageEnglish
Pages (from-to)590-601
Number of pages12
JournalEnergy Conversion and Management
Volume166
Early online date3 May 2018
DOIs
Publication statusPublished - 15 Jun 2018

Keywords

  • Climate
  • Fins
  • Performance enhancement
  • Phase change material
  • Photovoltaic
  • Thermal management
  • RCUK
  • EPSRC
  • EP/K03619X/

Fingerprint

Dive into the research topics of 'Climatic behaviour of solar photovoltaic integrated with phase change material'. Together they form a unique fingerprint.

Cite this