Intelligent sensors for intelligent systems: fault tolerant measurement methods for intelligent strain gauge pressure sensors

Tom Barker; David Sanders; Giles Tewkesbury; Ian Rogers

doi:10.1007/978-3-030-82196-8_46

Intelligent sensors for intelligent systems: fault tolerant measurement methods for intelligent strain gauge pressure sensors

Tom Barker
, David Sanders
, Giles Tewkesbury
, Ian Rogers

Gems Sensors and Controls

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Abstract

A new method is described for measuring an existing pressure transducer with greater potential for analysis. The new method has the potential to allow more comprehensive and early detection of sensor faults. This supports further work to develop fault tolerance, on board data quality estimation and failure prediction enabling intelligent sensors to operate more independently and reliably. A computer model of the sensor was constructed, and measurement approaches compared. A typical measurement scenario was simulated under normal operating conditions before and after an over pressure damage event. The range of failure modes detectable using this approach are discussed. The new method was then simulated using the same overpressure damage event. The results of the simulation are discussed and compared. The new measurement method has the potential to allow more comprehensive and early detection of sensor faults.

Original language	English
Title of host publication	Intelligent Systems and Applications
Subtitle of host publication	Proceedings of the 2021 Intelligent Systems Conference (IntelliSys) Volume 2
Editors	Kohei Arai
Publisher	Springer Nature
Pages	624-632
Number of pages	9
ISBN (Electronic)	9783030821968
ISBN (Print)	9783030821951
DOIs	https://doi.org/10.1007/978-3-030-82196-8_46
Publication status	Published - 3 Aug 2021
Event	IntelliSys 2021 - Amsterdam, Netherlands Duration: 2 Sept 2021 → 3 Sept 2021

Publication series

Name	Lecture Notes in Networks and Systems
Volume	295
ISSN (Print)	2367-3370
ISSN (Electronic)	2367-3389

Conference

Conference	IntelliSys 2021
Country/Territory	Netherlands
City	Amsterdam
Period	2/09/21 → 3/09/21

Keywords

Failure detection
Fault tolerance
Intelligent sensors
Pressure sensing
Strain gauge

Access to Document

10.1007/978-3-030-82196-8_46

A KTP to create intelligent sensors with TGA Industries and Gem Sensors and Controls
Sanders, D. (PI), Tewkesbury, G. (CoI) & Khusainov, R. (CoI)
Innovate UK
10/02/19 → 10/02/21
Project: Innovation

Top two per cent of researchers in the world
Sanders, D. (Recipient), 2 Nov 0001
Prize: National/international honour

Cite this

Barker, T., Sanders, D., Tewkesbury, G., & Rogers, I. (2021). Intelligent sensors for intelligent systems: fault tolerant measurement methods for intelligent strain gauge pressure sensors. In K. Arai (Ed.), Intelligent Systems and Applications: Proceedings of the 2021 Intelligent Systems Conference (IntelliSys) Volume 2 (pp. 624-632). (Lecture Notes in Networks and Systems; Vol. 295). Springer Nature. https://doi.org/10.1007/978-3-030-82196-8_46

Barker, Tom ; Sanders, David ; Tewkesbury, Giles et al. / Intelligent sensors for intelligent systems: fault tolerant measurement methods for intelligent strain gauge pressure sensors. Intelligent Systems and Applications: Proceedings of the 2021 Intelligent Systems Conference (IntelliSys) Volume 2. editor / Kohei Arai. Springer Nature, 2021. pp. 624-632 (Lecture Notes in Networks and Systems).

@inproceedings{b403445c5a9d4adba2cfabf5dd63d785,

title = "Intelligent sensors for intelligent systems: fault tolerant measurement methods for intelligent strain gauge pressure sensors",

abstract = "A new method is described for measuring an existing pressure transducer with greater potential for analysis. The new method has the potential to allow more comprehensive and early detection of sensor faults. This supports further work to develop fault tolerance, on board data quality estimation and failure prediction enabling intelligent sensors to operate more independently and reliably. A computer model of the sensor was constructed, and measurement approaches compared. A typical measurement scenario was simulated under normal operating conditions before and after an over pressure damage event. The range of failure modes detectable using this approach are discussed. The new method was then simulated using the same overpressure damage event. The results of the simulation are discussed and compared. The new measurement method has the potential to allow more comprehensive and early detection of sensor faults.",

keywords = "Failure detection, Fault tolerance, Intelligent sensors, Pressure sensing, Strain gauge",

author = "Tom Barker and David Sanders and Giles Tewkesbury and Ian Rogers",

note = "Publisher Copyright: {\textcopyright} 2022, The Author(s), under exclusive license to Springer Nature Switzerland AG.; IntelliSys 2021 ; Conference date: 02-09-2021 Through 03-09-2021",

year = "2021",

month = aug,

day = "3",

doi = "10.1007/978-3-030-82196-8\_46",

language = "English",

isbn = "9783030821951",

series = "Lecture Notes in Networks and Systems",

publisher = "Springer Nature",

pages = "624--632",

editor = "Kohei Arai",

booktitle = "Intelligent Systems and Applications",

address = "United Kingdom",

}

Barker, T, Sanders, D , Tewkesbury, G & Rogers, I 2021, Intelligent sensors for intelligent systems: fault tolerant measurement methods for intelligent strain gauge pressure sensors. in K Arai (ed.), Intelligent Systems and Applications: Proceedings of the 2021 Intelligent Systems Conference (IntelliSys) Volume 2. Lecture Notes in Networks and Systems, vol. 295, Springer Nature, pp. 624-632, IntelliSys 2021, Amsterdam, Netherlands, 2/09/21. https://doi.org/10.1007/978-3-030-82196-8_46

Intelligent sensors for intelligent systems: fault tolerant measurement methods for intelligent strain gauge pressure sensors. / Barker, Tom; Sanders, David ; Tewkesbury, Giles et al.
Intelligent Systems and Applications: Proceedings of the 2021 Intelligent Systems Conference (IntelliSys) Volume 2. ed. / Kohei Arai. Springer Nature, 2021. p. 624-632 (Lecture Notes in Networks and Systems; Vol. 295).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

TY - GEN

T1 - Intelligent sensors for intelligent systems: fault tolerant measurement methods for intelligent strain gauge pressure sensors

AU - Barker, Tom

AU - Sanders, David

AU - Tewkesbury, Giles

AU - Rogers, Ian

PY - 2021/8/3

Y1 - 2021/8/3

N2 - A new method is described for measuring an existing pressure transducer with greater potential for analysis. The new method has the potential to allow more comprehensive and early detection of sensor faults. This supports further work to develop fault tolerance, on board data quality estimation and failure prediction enabling intelligent sensors to operate more independently and reliably. A computer model of the sensor was constructed, and measurement approaches compared. A typical measurement scenario was simulated under normal operating conditions before and after an over pressure damage event. The range of failure modes detectable using this approach are discussed. The new method was then simulated using the same overpressure damage event. The results of the simulation are discussed and compared. The new measurement method has the potential to allow more comprehensive and early detection of sensor faults.

AB - A new method is described for measuring an existing pressure transducer with greater potential for analysis. The new method has the potential to allow more comprehensive and early detection of sensor faults. This supports further work to develop fault tolerance, on board data quality estimation and failure prediction enabling intelligent sensors to operate more independently and reliably. A computer model of the sensor was constructed, and measurement approaches compared. A typical measurement scenario was simulated under normal operating conditions before and after an over pressure damage event. The range of failure modes detectable using this approach are discussed. The new method was then simulated using the same overpressure damage event. The results of the simulation are discussed and compared. The new measurement method has the potential to allow more comprehensive and early detection of sensor faults.

KW - Failure detection

KW - Fault tolerance

KW - Intelligent sensors

KW - Pressure sensing

KW - Strain gauge

UR - https://www.scopus.com/pages/publications/85113523569

U2 - 10.1007/978-3-030-82196-8_46

DO - 10.1007/978-3-030-82196-8_46

M3 - Conference contribution

AN - SCOPUS:85113523569

SN - 9783030821951

T3 - Lecture Notes in Networks and Systems

SP - 624

EP - 632

BT - Intelligent Systems and Applications

A2 - Arai, Kohei

PB - Springer Nature

T2 - IntelliSys 2021

Y2 - 2 September 2021 through 3 September 2021

ER -

Barker T, Sanders D , Tewkesbury G, Rogers I. Intelligent sensors for intelligent systems: fault tolerant measurement methods for intelligent strain gauge pressure sensors. In Arai K, editor, Intelligent Systems and Applications: Proceedings of the 2021 Intelligent Systems Conference (IntelliSys) Volume 2. Springer Nature. 2021. p. 624-632. (Lecture Notes in Networks and Systems). doi: 10.1007/978-3-030-82196-8_46

Intelligent sensors for intelligent systems: fault tolerant measurement methods for intelligent strain gauge pressure sensors

Abstract

Publication series

Conference

Keywords

Access to Document

Fingerprint

Projects

A KTP to create intelligent sensors with TGA Industries and Gem Sensors and Controls

Prizes

Top two per cent of researchers in the world

Cite this