Resonant modes analysis in power systems algorithms and Matlab GUI

Branislav Vuksanovic; Hemanshu Pota

doi:10.1109/ICIVC.2016.7571286

Resonant modes analysis in power systems algorithms and Matlab GUI

Branislav Vuksanovic, Hemanshu Pota

University of New South Wales

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

18 Downloads (Pure)

Abstract

This paper describes a set of algorithms used to detect and analyse resonant modes present in the oscillatory type signals measured in power systems using Wide Area Measurement System (WAMS) technology. To enable easier analysis and extraction of the main signal parameters - frequency, amplitude and damping, described algorithms have been implemented and tested using Matlab based GUI program. Algorithms performance, operation of developed GUI and some initial results are presented in this paper indicating the potential use of this approach and described methods in large, interconnected power systems of today.

Original language	English
Title of host publication	International Conference on Image, Vision and Computing 2016
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	129-134
Number of pages	6
ISBN (Print)	978-1509037568
DOIs	https://doi.org/10.1109/ICIVC.2016.7571286
Publication status	Published - 22 Sept 2016
Event	2016 5th IEEE International Conference on Image, Vision and Computing (ICIVC) - Portmouth, United Kingdom Duration: 3 Aug 2016 → 5 Aug 2016

Conference

Conference	2016 5th IEEE International Conference on Image, Vision and Computing (ICIVC)
Country/Territory	United Kingdom
City	Portmouth
Period	3/08/16 → 5/08/16

Keywords

damping
power systems stability
oscilations
Prony algorithm
LPSVD
matrix pencil

Access to Document

10.1109/ICIVC.2016.7571286

Cite this

@inproceedings{6163776122634bb1ae2e7d92ee19babd,

title = "Resonant modes analysis in power systems algorithms and Matlab GUI",

abstract = "This paper describes a set of algorithms used to detect and analyse resonant modes present in the oscillatory type signals measured in power systems using Wide Area Measurement System (WAMS) technology. To enable easier analysis and extraction of the main signal parameters - frequency, amplitude and damping, described algorithms have been implemented and tested using Matlab based GUI program. Algorithms performance, operation of developed GUI and some initial results are presented in this paper indicating the potential use of this approach and described methods in large, interconnected power systems of today.",

keywords = "damping, power systems stability, oscilations, Prony algorithm, LPSVD, matrix pencil",

author = "Branislav Vuksanovic and Hemanshu Pota",

year = "2016",

month = sep,

day = "22",

doi = "10.1109/ICIVC.2016.7571286",

language = "English",

isbn = "978-1509037568",

pages = "129--134",

booktitle = "International Conference on Image, Vision and Computing 2016",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

address = "United States",

note = "2016 5th IEEE International Conference on Image, Vision and Computing (ICIVC) ; Conference date: 03-08-2016 Through 05-08-2016",

}

Vuksanovic, B & Pota, H 2016, Resonant modes analysis in power systems algorithms and Matlab GUI. in International Conference on Image, Vision and Computing 2016. Institute of Electrical and Electronics Engineers Inc., pp. 129-134, 2016 5th IEEE International Conference on Image, Vision and Computing (ICIVC), Portmouth, United Kingdom, 3/08/16. https://doi.org/10.1109/ICIVC.2016.7571286

TY - GEN

T1 - Resonant modes analysis in power systems algorithms and Matlab GUI

AU - Vuksanovic, Branislav

AU - Pota, Hemanshu

PY - 2016/9/22

Y1 - 2016/9/22

N2 - This paper describes a set of algorithms used to detect and analyse resonant modes present in the oscillatory type signals measured in power systems using Wide Area Measurement System (WAMS) technology. To enable easier analysis and extraction of the main signal parameters - frequency, amplitude and damping, described algorithms have been implemented and tested using Matlab based GUI program. Algorithms performance, operation of developed GUI and some initial results are presented in this paper indicating the potential use of this approach and described methods in large, interconnected power systems of today.

AB - This paper describes a set of algorithms used to detect and analyse resonant modes present in the oscillatory type signals measured in power systems using Wide Area Measurement System (WAMS) technology. To enable easier analysis and extraction of the main signal parameters - frequency, amplitude and damping, described algorithms have been implemented and tested using Matlab based GUI program. Algorithms performance, operation of developed GUI and some initial results are presented in this paper indicating the potential use of this approach and described methods in large, interconnected power systems of today.

KW - damping

KW - power systems stability

KW - oscilations

KW - Prony algorithm

KW - LPSVD

KW - matrix pencil

U2 - 10.1109/ICIVC.2016.7571286

DO - 10.1109/ICIVC.2016.7571286

M3 - Conference contribution

SN - 978-1509037568

SP - 129

EP - 134

BT - International Conference on Image, Vision and Computing 2016

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2016 5th IEEE International Conference on Image, Vision and Computing (ICIVC)

Y2 - 3 August 2016 through 5 August 2016

ER -

Resonant modes analysis in power systems algorithms and Matlab GUI

Abstract

Conference

Keywords

Access to Document

Fingerprint

Cite this