Skip to content

Dr Mojtaba Ghodsi

Senior Lecturer

  1. 2021
  2. Early online

    A coupled DQ-Heaviside-NURBS approach to investigate nonlinear dynamic response of GRE cylindrical shells under impulse loads

    Yasin Heydarpour, Morteza Mohammadzaheri, Dr Mojtaba Ghodsi, Payam Soltani, Farooq Al-Jahwari, Issam Bahadur & Badar Al-Amri, 1 Aug 2021, In: Thin-Walled Structures. 165, 13 p., 107958.

    Research output: Contribution to journalArticlepeer-review

  3. Published

    Fault diagnosis of an automobile cylinder block with neural process of modal information

    Morteza Morteza Mohammadzaheri, Amirhosein Amouzadeh, Mojtaba Doustmohammadi, Mohammadreza Emadi, Navid Nasiri, Dr Mojtaba Ghodsi & Payam Soltani, 15 Apr 2021, In: IJMME: International Journal of Mechanical and Mechatronics Engineering. 21, 2, p. 1-8

    Research output: Contribution to journalArticlepeer-review

  4. Published

    Assessment of capacitor-based charge estimators for piezoelectric actuators

    Mortezaa Mohammadzaheri, Sami Alsulti, Dr Mojtaba Ghodsi, Issam Bahadur & Mohammadreza Emadi, 7 Mar 2021, 2021 IEEE International Conference on Mechatronics, ICM 2021. Institute of Electrical and Electronics Engineers Inc., 9385677

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  5. Published

    Non-linear modeling and sensitive analysis of a magnetostrictive force sensor

    Dr Mojtaba Ghodsi, Morteza Morteza Mohammadzaheri & Payam Soltani, 1 Mar 2021, ALLSENSORS 2020: The Fifth International Conference on Advances in Sensors, Actuators, Metering and Sensing. Mauri, J. L., Cruvinel, P. E., Rivadeneyra-Torres, A., Niedermayer, M., Bernardini, S. & Tonezzer, M. (eds.). International Academy, Research, and Industry Association , p. 78-83 6 p. (ALLSENSORS Proceedings Series).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  6. 2020
  7. Published

    Application of the hybrid DQ- Heaviside-NURBS method for dynamic analysis of FG-GPLRC cylindrical shells subjected to impulse load

    Yasin Heydarpour, Morteza Mohammadzaheri, Dr Mojtaba Ghodsi, Payam Soltani, Farooq AlJahwari, Issam Bahadur & Badar Al-Amri, 1 Oct 2020, In: Thin-Walled Structures. 155, 14 p., 106914.

    Research output: Contribution to journalArticlepeer-review

  8. Published

    Development of a charge estimator for piezoelectric actuators: a radial basis function approach

    Morteza Morteza Mohammadzaheri, Mohammadreza Emadi, Dr Mojtaba Ghodsi & Ashraf Saleem, 1 Jun 2020, In: International Journal of Artificial Intelligence and Machine Learning. 10, 1, p. 31-44 14 p., 3.

    Research output: Contribution to journalArticlepeer-review

  9. Published

    Effect of inductance ratio on operating frequencies of a hybrid resonant inverter

    Dr Mojtaba Ghodsi, Hamidreza Ziaifar, Morteza Morteza Mohammadzaheri & Payam Soltani, 2 Apr 2020, In: International Journal of Energy and Power Engineering. 14, 5, p. 123-128 6 p.

    Research output: Contribution to journalArticlepeer-review

  10. Published

    Effect of damping on performance of magnetostrictive vibration energy harvester

    Dr Mojtaba Ghodsi, Hamidreza Ziaifar, Morteza Morteza Mohammadzaheri & Payam Soltani, 4 Mar 2020, In: WASET International Journal of Mechanical and Mechatronics Engineering. 14, 4, p. 147-151 5 p.

    Research output: Contribution to journalArticlepeer-review

  11. Published

    Health monitoring of welded pipelines with mechanical waves and fuzzy inference systems

    Morteza Morteza Mohammadzaheri, Ahmad Akbarifar & Dr Mojtaba Ghodsi, 24 Feb 2020, Proceedings of the 16th International Gas Union Research Conference. International Gas Union, 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  12. 2019
  13. Published

    Design and fabrication of a new piezoelectric paper feeder actuator without mechanical parts

    Shahryar Ghorbanirezaei, Yousef Hojjat & Dr Mojtaba Ghodsi, 25 Aug 2019, In: Smart Structures and Systems. 24, 2, p. 183-191

    Research output: Contribution to journalArticlepeer-review

  14. Published

    Temperature effects on electromechanical response of deposited piezoelectric sensors used in structural health monitoring of aerospace structures

    Hamidreza Hoshyarmanesh, Dr Mojtaba Ghodsi, Minjae Kim, Hyuang Hee Cho & Hyung-Ho Park, 22 Jun 2019, In: Sensors. 19, 12, p. 1-15 15 p., 2805.

    Research output: Contribution to journalArticlepeer-review

  15. Published

    Modeling and characterization of permendur cantilever beam for energy harvesting

    Dr Mojtaba Ghodsi, Hamidreza Ziaifar, Morteza Morteza Mohammadzaheri & Amur Al-Yahmedi, 1 Jun 2019, In: Energy: The International Journal. 176, p. 561-569 9 p.

    Research output: Contribution to journalArticlepeer-review

  16. Published

    Dynamic analysis and performance optimization of permendur cantilevered energy harvester

    Dr Mojtaba Ghodsi, Hamidreza Ziaiefar, Morteza Mohammadzaheri & Issam Bahadur, 25 May 2019, In: Smart Structures and Systems. 23, 5, p. 421-428 8 p.

    Research output: Contribution to journalArticlepeer-review

  17. 2018
  18. Published

    Development of a fuzzy model to estimate the head of gaseous petroleum fluids driven by electrical submersible pumps

    Morteza Mohammadzaheri, A. AlQallaf, Dr Mojtaba Ghodsi & Hamidreza Ziaiefar, 1 Oct 2018, In: Fuzzy Information and Engineering. 10, 1, p. 99-106 8 p.

    Research output: Contribution to journalArticlepeer-review

  19. Published

    Experimental study on the effect of point angle on force and temperature in ultrasonically assisted bone drilling

    Khurshid Alama, Dr Mojtaba Ghodsi, Abdullah Al-Shabibi & Vadim Silberschmidt, Apr 2018, In: Journal of Medical and Biological Engineering. 38, p. 236–243 8 p.

    Research output: Contribution to journalArticlepeer-review

  20. Published

    Experimental study on the effect of drill quality on bone temperature in drilling

    Khurshid Alam, Syed Husain Imran, Abdullah Al-Shabibi, Dr Mojtaba Ghodsi & Vadim Silberschmidth, 27 Feb 2018, In: Biomedical Engineering: Applications, Basis and Communications. 30, 2, p. 1-8 8 p., 1850018.

    Research output: Contribution to journalArticlepeer-review

  21. Published

    Investigation of effective parameters of drop-on-demand droplet generator

    M. S. Sarebandi, Dr Mojtaba Ghodsi, Yousef Hojjat, Hesam Sadeghian, Hamidreza Ziaiefar, Morteza Mohammadzaheri & A. Al-Yahmedi, 7 Jan 2018, In: Journal of Engineering Research. 14, 2, p. 182-190 9 p.

    Research output: Contribution to journalArticlepeer-review

  22. 2017
  23. Published

    Design and implementation of an accurate, portable, and time-efficient impedance-based transceiver for structural health monitoring

    Hamidreza Hoshyarmanesh, Ali Abbasi, Peyman Moein, Dr Mojtaba Ghodsi & Kourosh Zareinia, 15 Dec 2017, In: IEEE/ASME Transactions on Mechatronics . 22, 6, p. 2809-2814 6 p.

    Research output: Contribution to journalArticlepeer-review

  24. Published

    Development of gasoline direct injector using giant magnetostrictive materials

    Dr Mojtaba Ghodsi, Nasser Hosseinzadeh, Abdullah Özer, Hamid Rajabzadeh Dizaj, Yousef Hojjat, Nader Garjasi Varzeghani, Mohammad Reza Sheykholeslami, Soheil Talebian, Mohammad Hadi Ghodsi & Amer Al-Yahmadi, 1 Jan 2017, In: IEEE Transactions on Industry Applications. 53, 1, p. 521-529 9 p.

    Research output: Contribution to journalArticlepeer-review

  25. Published

    Numerical and experimental vibration analysis of olive tree for optimal mechanized harvesting efficiency and productivity

    Hamidreza Hoshyarmanesh, Hamid Rezvanı Dastgerdi, Dr Mojtaba Ghodsi, Rasoul Khandan & Kourosh Zareinia, 1 Jan 2017, In: Computers and Electronics in Agriculture. 132, p. 34-48 15 p.

    Research output: Contribution to journalArticlepeer-review

Previous 1 2 3 Next

ID: 18763790