Skip to content

Statistical and sequential (fill-and-draw) approach to enhance rhamnolipid production using industrial lignocellulosic hydrolysate C6 stream from Achromobacter sp. (PS1)

Research output: Contribution to journalArticle

The production of rhamnolipid from Achromobacter sp. (PS1) was statistically optimized using industrial lignocellulosic hydrolysate C6 stream containing 5.0% total sugars and further improved by adopting a sequential fermentation approach with fill-and-draw operation. Response surface methodology was used to statistically optimize the medium containing lignocellulosic hydrolyzed sugars along with other parameters as sodium nitrate, yeast extract, ferrous sulphate, phosphate concentrations and agitation under a six variable central composite design. The experimental rhamnolipid yield of 5.46 g/L was obtained at optimum conditions of total sugars 40 g/L(w/v), sodium nitrate 6.0 (g/L), yeast extract 2 (g/L), ferrous sulphate 0.2 (mg/L) and phosphate 1000mM at 100 rpm at 30°C in 8 days. The sequential approach with fill-and-draw operation, resulted in an overall yield of 19.35 g/L in five sequential cycles with an increase of 258% in rhamnolipid yield over the batch process due to replenishment of nutrients and dilution of toxic byproducts.
Original languageEnglish
JournalBioresource Technology
Early online date16 May 2019
DOIs
Publication statusEarly online - 16 May 2019

Documents

  • Statistical and sequential fill-and-draw appraoch

    Accepted author manuscript (Post-print), 1.5 MB, PDF document

    Due to publisher’s copyright restrictions, this document is not freely available to download from this website until: 16/05/20

    Licence: CC BY-NC-ND

Relations Get citation (various referencing formats)

ID: 14038380